Replacement Part Numbers and Parts Sources

M274 Mechanical Mule Knowledge Base
Chuck W.
G-Lieutenant General
G-Lieutenant General
Posts: 5076
Joined: Wed Dec 18, 2002 1:00 pm

Re: NAPA numbers

Post by Chuck W. » Sat Feb 15, 2014 4:15 pm

Thanks to GUNNUT in Iowa for this, throwout bearing is NAPA N1054.

Action
G-Lieutenant General
G-Lieutenant General
Posts: 4313
Joined: Mon Feb 06, 2006 5:19 pm
Location: SW Florida
Contact:

Re: NAPA numbers

Post by Action » Tue May 06, 2014 10:08 am

Has anyone used the FRAM ca9345 air filter? It isn't even close to the filter I just pulled out of the MULE. The hole is bigger on the FRAM, and the FRAM is a couple inches taller.

Jason

97 heavyduty
G-Staff Sergeant
G-Staff Sergeant
Posts: 57
Joined: Thu Oct 24, 2013 8:11 am
Location: Saint Paul Nebraska

Re: NAPA numbers

Post by 97 heavyduty » Wed May 07, 2014 6:36 pm

Here is a link to what I done.viewtopic.php?f=79&t=232437

Warren Duchesne
G-Colonel
G-Colonel
Posts: 1483
Joined: Sun Dec 22, 2002 6:47 pm
Location: Monroe , La

Re: NAPA numbers

Post by Warren Duchesne » Tue Jun 17, 2014 6:02 pm

What about the seal behind the brake drum . The front differental yoke seal ? Anyone have that number ? Thanks Warren Duchesne

Chuck W.
G-Lieutenant General
G-Lieutenant General
Posts: 5076
Joined: Wed Dec 18, 2002 1:00 pm

Re: NAPA numbers

Post by Chuck W. » Tue Jun 17, 2014 6:47 pm

Try a National 470548, O'Reilly Auto Parts $11.49, or John Emery has the complete metal shield assembly with the plastic and felt washers and seal already installed for $25.


cpearce
G-Staff Sergeant
G-Staff Sergeant
Posts: 61
Joined: Thu Aug 01, 2013 9:29 am

Re: NAPA numbers

Post by cpearce » Sun Aug 03, 2014 2:27 pm

How tall is the oil filter supposed to be? The wix 51514 seems short.

Chuck W.
G-Lieutenant General
G-Lieutenant General
Posts: 5076
Joined: Wed Dec 18, 2002 1:00 pm

Re: NAPA numbers

Post by Chuck W. » Tue Aug 12, 2014 9:12 am

NOS oil filter element is 3-7/8" tall and 2-7/8" in diameter.

muleman7
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 478
Joined: Mon May 14, 2007 6:36 pm
Location: Georgia
Contact:

Re: NAPA numbers

Post by muleman7 » Wed Feb 10, 2016 6:55 am

Hub Seals for M274 Thru A4 and Front Seals for A5

The M274 Seals will not Properly Fit the Hubs that have a Radius from the Seal Surface to the Hub Inner Face. The M274 Hubs had a 90 degree transition and would break at that point. The National 473455 will fit all Hubs.

National 473455

Best Price at Rock Auto Parts

http://www.rockauto.com/en/partsearch/?partnum=473455 $6.29

Air Filter Replacement for M274-A1 Thru A5

http://www.rockauto.com/en/partsearch/?partnum=va5306 $3.31

Image
Mules are my passion
www.m274armymules.com

Dbaumanjr
G-Sergeant First Class
G-Sergeant First Class
Posts: 83
Joined: Sun Jan 11, 2015 11:05 am

Re: Replacement Part Numbers and Parts Sources

Post by Dbaumanjr » Thu May 19, 2016 4:58 am

4 cylinder mule fuel filter number is :3034 Napa
Darryl
Real Jeeps are Olive Drab
'67 M715 w/winch
'66 M718 Frontline Ambulance
'64 M274a1 Finished!
'58 M274 Finished!

Post Reply

Return to “MULE M274 Technical”

Who is online

Users browsing this forum: No registered users and 1 guest